Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
850 Universal Interface UI-5001 Pasco Scientific |
||
Specifications |
||
Four Analog Ports |
For use with analog ScienceWorkshop sensors |
|
Input impedance |
1 MΩ |
|
Input Protection |
±250 V continuous |
|
Selectable Voltage Gain |
X1, X10, X100, X1000 |
|
Not for use with CI-6552A Power Amplifier |
||
High Speed Sampling |
Measure voltages on two channels with sample rates of up to 10 MHz simultaneously or on three or four channels at up to 1 MHz simultaneously. |
|
15 W Function Generator |
Waveforms: sine, triangle, square wave, positive and negative ramps, DC |
|
Frequency Range |
0.001 Hz to 100 kHz; 1 mHz resolution |
|
Amplitude Range |
±15 V |
|
Resolution |
7.3 mV, 12-bit DAC |
|
Max Output Current |
1 A at 15 V, over-current detection |
|
Selectable Short-Circuit Current Limit |
1.5 A, 1.1 A, 0.55 A |
|
Selectable Voltage Limit |
||
Selectable DC Offset |
||
Frequency Sweep Function |
||
Measure Output Current |
61 μA at 10V |
|
Dual Independent High Frequency Function Generators |
Independent control of frequency, waveform, and amplitude |
|
|
Waveforms |
sine, triangle, square wave, positive and negative ramps, DC |
|
Frequency Range |
0.001 Hz to 500 kHz; 1 mHz resolution |
|
Amplitude Range |
±10 V |
|
Resolution |
2.5 mV, 12-bit DAC |
|
Max Output Current |
50 mA at 10 V |
4 Photogate Ports |
Digital sensors such as Photogates and Time-of-Flight plug directly into the 850 without needing adapters |
|
Compatible with all ScienceWorkshop digital sensors |
||
Sensor Connect Detection |
||
4 PASPORT Sensor Ports |
Compatible with PASCO's complete line of more than 70 PASPORT sensors |
|
Sample rates depend on sensors |
||
Sample rate of the ports can be greater than 1000 Hz |
||
850 Power Adapter |
20 VDC, 6 A |
|
Computer Connection |
USB 2.0 ( 4890 Mbps ) |
|
External Trigger Input/Output |
BNC Jack |
|
Synchronize multiple 850s |
||
Signal direction controlled by software |
||
3.3 V TTL, 510 Ω |
||
ESD protection |
||
External Module 44-pin Connector |
For connecting accessories ( available in the future ) to control and monitor a variety of new devices such as stepper motors and circuit boards |
|
Access to the 3 Signal Generators |
||
8 Additional Digital I/O Pins |
||
3 Additional Analog Differential Inputs ( ±10 V ) |
||
High Speed PASPORT Channel for Self-Identification of Plug-In Modules |
||
Power Sources |
+5 V at 500 mA, ±12 V at ±300 mA |